Waterproofing and Vapor Control

Summary – Intelligent materials allow trapped moisture to escape during cold months, preventing rot and mold. Wet rooms given special attention indoors.   End result is a highly durable building.

Exterior Membrane

This slideshow requires JavaScript.

Taped sheating, Solitex Mento, Tescon Tape work in conjunction with VOC-free sealed Foamglas exterior shell as extremely durable method of keeping water out.

 

Wet Room Waterproofing

Schulter wet-room waterproofing was put throughout all bathrooms and the open kitchen/living/entry areas of the home.

This slideshow requires JavaScript.

 

We chose Schulter because it’s a fully bonded, watertight assembly for tiled areas.   Eliminates failures due to penetration, and installs rapidly.

Interior Vapor Control

We chose Intello Paper – a smart Wall Vapor control / Indoor Airtight Barrier for the following specifications:

  • Winter-Closed –  High diffusion tightness (0.17 Perm, protection against condensation)
  • Summer-Open – Max diffusion openness in summer (13.20 Perm, facilitates rapid drying to the interior)
  • Translucent – allows insulation to be inspected
  • Lightweight & easy install vs. OSB/Plywood sheathing
  • Recyclable
  • Air permeance per ASTM E2178 0.00005cfm/ft2
  • Class A material per ASTM E84 test (0 FS, 35 SDI)

Intello paper was added as a final airtight layer to the interior before gypsum, and sealed with Tescon tape.